Filter
Top Products
QUICK-ATTACH INSTRUCTIONS
UNCOUPLING
1. Raise sliding latches as shown in Figure 1.
2. Rotate QT pins out of the lower notches, raise, and then rotate them into the upper notches
of the sliding latches as shown in Figure 2.
3. Slide the sliding latches down as shown in Figure 3. This secures the QT pins in the “up”
position so they do not interfere when hooking up to the next attachment.
COUPLING
1. Approach and hook onto the attachment with QT pins secured in the “up” position as shown
in Figure 3.
2. When the QT frame is flat against the attachment, raise the sliding latches as shown in Fig-
ure 2.
3. Rotate QT pins out of the upper notches, lower, and then rotate them into the lower notches
on the sliding latches as shown in Figure 1. NOTE: If the QT pins do not easily slide thru the
lug on the attachment, do not force them. Simply rotate the attachment back and forth
slowly with the bucket cylinders of the loader and the QT pins should fall into place. Periodi-
cally grease the QT pins and sliding latches.
4. Secure the QT pins in the “down” position by sliding the latches down.