Miller Electric GP30 Compact Loader User Manual


 
WARRANTY Dec 2004
ALL PRODUCTS MANUFACTURED BY MILLER LOADERS, INCOPRORATED (MLI) EXCEPT THE
CHROME-PLATED PIVOT PINS USED ON GREASELESS LOADERS, ARE GUARENTEED TO THE
ORIGINAL PURCHASER FOR A PERIOD OF ONE YEAR FROM THE DAY OF PURCHASE AGAINST ANY
DEFECTS IN MATERIALS AND WORKMANSHIP OF FARM LOADERS AND ATTACHMENTS THAT ARE
USED IN NORMAL FARM OPERATIONS. THE CHROME-PLATED PIVOT PINS USED ON GREASELESS
LOADERS ARE GUARENTEED TO THE ORIGINAL PURCHASER FOR A PERIOD OF FIVE YEARS FROM
THE DAY OF PURCHASE AGAINST ANY DEFECTS IN MATERIALS AND WORKMANSHIP OR AGAINST
WEAR THROUGH OF THE CHROME FINISH COVERING AT LEAST ONE-QUARTER OF THE PIN
SURFACE.
ALL GREASELESS COMPOSITE BEARINGS SOLD BUT NOT MANUFACTURED BY MLI ARE
GUARENTEED TO THE ORIGINAL PURCHASER FOR A PERIOD OF FIVE YEARS FROM THE DAY OF
PURCHASE AGAINST BREAKAGE OR LOSS OF THEIR SELF-LUBRICATING PROPERTY.
THE FIVE YEAR WARRANTY FOR THE CHROME-PLATED PIVOT PINS AND GREASELESS COMPOSITE
BEARINGS IS LIMITED TO THE PARTS ONLY. MLI IS NOT RESPONSIBLE FOR ANY LABOR NECESSARY
FOR THE INSPECTION, REMOVAL, OR REPLACEMENT OF SAID PIVOT PINS AND/OR COMPOSITE
BEARINGS.
ALL PARTS SOLD BUT NOT MANUFACTURED BY MLI THAT INCLUDE BUT ARE NOT LIMITED TO
ZINC-PLATED PINS, HOSES, VALVES, QUICK COUPLERS, PUMPS, TANKS, ETC. ARE COVERED ONLY
TO THE EXTENT OF THE MANUFACTURE’S WARRANTY ON THESE ITEMS. MLI DOES NOT
WARRANTY THESE ITEMS EXPRESSLY OR IMPLIEDLY.
DEFACEMENT OF ANY PART BY WELDING OR OTHERWISE ALTERING, OR EXCESSIVE WEAR ON PINS
CAUSED BY LACK OF LUBRICATION, NULLIFIES THE WARRANTY ON THE MLI PRODUCT.
MLI ASSUMES NO RESPONSIBILITY AS TO THE PERFORMANCE OR FAILURE OF A TRACTOR’S
HYDRAULIC SYSTEM.
THE HYDRAULIC COMPONENTS OF THE MLI PRODUCTS ARE GUARENTEED UP TO A PRESSURE OF
3000 POUNDS PER SQUARE INCH AT A MAXIMUM FLOW RATE OF 30 GALLONS PER MINUTE.
MLI ASSUMES NO RESPONSIBILITY FOR THE FAILURE OF THE PURCHASER TO SECURE THE LOADER
TO THE TRACTOR PROPER, WHICH INCLUDES PROPER BOLT TIGHTENING AND SECURING OF ALL
CONNECTION POINTS.
ALL ITEMS MANUFACTURED BY MLI REQUIRING WARRANTY CONSIDERATION MUST BE RETURNED
TO MLI OR A DESIGNATED REPRESENTATIVE BY THE ORIGINAL PURCHASER. ANY ITEM SO
RETURNED BY COMMON CARRIER MUST BE PREPAID FREIGHT.
THE WARRANTIES PROVIDED BY MLI AS REFERRED TO ABOVE SHALL BE THE SOLE AND
EXCLUSIVE WARRANTIES. THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY OTHER
OBLIGATION ON THE PART OF MLI WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY.
IN NO EVENT SHALL THE WARRANTIES OF MLI REQUIRE MORE FROM MLI THAN THE REPAIR OR
REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE DEFECTIVE WITHIN THE
EFFECTIVE PERIOD OF THE WARRANTY, MLI SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
MILLER LOADERS INC, 1242 ARIZONA AVE, LARCHWOOD, IA 51241
PHONE: 1-800-570-8205
Or (712) 477-2795
FAX: (712) 477-2500