Filter
Top Products
To program memory channel 2 follow the instructions for programming memory
channel 1, except substituting channel 2 for channel 1.
c. “M3 SC Button”; To start scan, set the squelch to mute the background noise. Press
and release the “SC” scan button, scan will begin. The scan will stop on all channels
where a signal is received with enough strength to open the squelch. The squelch will
remain stopped for a few seconds after the signal disappears to allow time to answer
the call. To stop scan press the SC button. Pressing the UP/DOWN or PTT buttons
will also stop the scan.
To select memory channel M3 press and release the “M3” button.
To program memory channel 3 follow the instructions for programming memory
channel 1, except substituting channel 3 for channel 1.
d. “M4 CB/WX Button”; To change between CB and weather receive, press and release
the CB/WX button. To select weather channels press the up or down button.
To select memory channel M4 press and release the “M4” button.
To program memory channel 4 follow the instructions for programming memory
channel 1, except substituting channel 4 for channel 1.
e. “M5 Lock Button”; To lock out all button functions except PTT, press and release the
LOCK button. To unlock, again press and release the LOCK button.
To select memory channel M5 press and release the “M5” button.
To program memory channel 5 follow the instructions for programming memory
channel 1, except substituting channel 5 for channel 1.