Meyer 2636 Spreader User Manual


 
Model V-Max —48—
PRIOR TO 08 SERIAL NOS.
918-0209 PTO DRIVE SHAFT ASSEMBLY
1000 RPM 1-3/8” 21 SPLINE (STANDARD)
918-0211 PTO DRIVE SHAFT
1000 RPM 1-3/4” 20 SPLINE (OPTIONAL)
WWE2480 (80 DEGREE C.V.)
KEY MEYER PART
NO.
DESCRIPTION
1 918-0208-1-1 Yoke 1-3/8"-21 Splined Assem-
bly-Standard
918-0210-1-1 Yoke 1-3/4"-20 Splined Assem-
bly-Optional
2 918-0208-1-2 Grease Zerk in item 3
3 918-0208-1-3 Double Yoke
4 918-0208-1-4 Inboard Yoke
5 918-0208-1-5 Cross and Bearing Kit
6 918-0208-1-6 Spring Pin 10 x 80
7 918-0208-2-1 Cross and Bearing Kit
8 918-0209-1-2 Profile and Sleeve Welded As.
4" Shorter
9 918-0209-2-2 Overrunning Clutch & 1bGA
Profile Assy. 4" Shorter
10 918-0208-2-3-1 Clamping Cone Bolt (Included in
Item 11)
11 918-0208-2-3 Cut Out Clutch 2100NM
12 918-0208-2-4 Bearing Ring SC25
13 918-0209-2-1 Outer Shield Tube OVL 4"
Shorter
KEY MEYER PART
NO.
DESCRIPTION
14 918-0209-1-1 Inner shield Tube Round 4"
Shorter
15 918-0208-1-8 CV Cone & Bearing Assy.
16 918-0208-1-9 Shield Cone 3 Rib
17 918-0208-2-6 Shield Cone 8 Rib
18 918-0208-2-7 Safety Chain
19 918-0208-2-8 Decal Out-In Item 13
20 918-0208-1-10 Decal In-In Item 8
21 918-0208-2-9 Screw-In Item 15,16 & 17
22 918-0208-1-11 Support Bearing
23 918-0208-1-12 Zerk-In Item 8
24 918-0208-1-13 Cross and Bearing Kit
25 918-0208-2-10 Decal-K64
26 918-0209-1 1-3/8-21 (Std) Spline Tractor 1/2
Assembly-4" Shorter
918-0211-1 1-3/4-20 (Optional) Spline Trac
-
tor 1/2 Assembly-4" Shorter
27 918-0209-2 1000 RPM Cutout Clutch Imple
-
ment 1/2 Assy. 4" Shorter
28 918-0208-1-1-1 AS-Lock Kit For Item 1 (Inc.
Ring, Collar & Balls)
NOTE: PTO IS 4" SHORTER THEN
STANDARD 540 OR 1000 RPM PTO