Mega Catch MCP800 Insect Control Equipment User Manual


 
22
If your Mega-Catch Mosquito Trap fails to operate:
Check that the Power Cable is properly connected to both the Trap and the mains, and
that the power is switched on.
Check that the power cable has not been damaged, e.g. by a lawn mower or animals
(squirrels, dogs or racoons).
Check that the Programmable Timer is set to the "ON" position.
Check that the Programmable Timer, if set to AUTO, is set to operate at the time you
are checking its operation.
If these steps fail then email us at info@megacatch.com - or call the Service Centre number
shown on the separate Warranty Certificate.
If the lights in the Mega-Catch Mosquito Trap come on but the Fan fails to operate:
Check whether there has been a build up of material in the Fan and/or Fan Safety Guard
which is preventing the Fan blade from turning (Refer to Page 13 - Care of Your Trap
section).
If these steps fail then email us at info@megacatch.com - or call the Service Centre number
shown on the separate Warranty Certificate.
NOTE: Do not attempt to access the internal electronic components of your Mega-Catch
Mosquito Trap. Opening of sealed units will void your warranty.
Problem Solving
Need Help?
Specifications
For service, repair or any questions concerning Mega-Catch products, email us at
info@megacatch.com - or call the Service Centre number shown on the separate Warranty
Certificate. Do NOT return products to the place of purchase. Do NOT return products to an
Authorized Distributor. You may also want to consult our website: www.megacatch.com.
Power Source AC Adaptor YL-25-12
CSA Listing E207075 37XZ
Input 120V AC 60Hz
Output 12V AC 2.08A 25W
U.S. Design Patent No: 449,091
U.S. Patent No: 6,199.316
U.S. Trade Mark Reg. No: 2,679,688