Mantis 811103 Lawn Mower User Manual


 
GB
15
9. Maintenance, care and storage
9.1. Maintenance
Maintenance includes all jobs
which keep your Cordless Reel
Mower in perfect working order.
By regularly checking the unit
(firm seating of screw
connections, cracks, damage)
and replacing defective or worn
parts you can prevent accidents
and failure.
Repairs may only be carried out
by Mantis service centers or
dealers authorized by Mantis.
A
Before cleaning and setting
the Hand Lawnmower,
switch off the motor and remove
the battery to prevent starting
the motor unintentionally.
9.2. The Battery
Charging the Battery
A
Note: Only charge the
battery withthe charger
supplied! Using other charging
units could lead to damage and
injury. Using a charger other
than the Mantis charger supplied
releases Mantis from all liability
and warranty claims.
We recommend charging the
battery immediately after using
your mower using the supplied
charger.
A
Important ! Never charge
the battery after having
been heated up by operation or
sun. Let cool down first.
Never expose the battery to
direct sunlight while charging.
Never charge the battery
anywhere near acids and easily
inflammable materials. Danger
of fire!
Note: Do not wait until the
battery is completely flat before
recharging.
Charge the battery in a dry
place as follows:
1. Open the cover of the harness
compartment (fig. J pos. 13).
2. Pull the battery out of the
contact bar (fig. I pos. 24).
3. Plug the plug (fig. F pos. 22)
of the charger into the
charging socket (fig. F pos.
23).
4. Then plug the charger (fig. F
pos. 21) into the mains socket.
5. To resume mowing after
charging the battery, proceed
as described in section 7.2.
Important:
.
Protect the charging socket
(fig.F pos.23) against dirt and
moisture.
.
If the battery capacity is so
low that the Cordless Reel
Mower switches off
automatically then the
charging time is 24 hours.
The battery should be stored at
a dry, elevated, frost-free, locked
up place, where children have
no access. Avoid direct sunlight.
Always disconnect the battery
from tools before storing to
avoid improper use and
accidents.
Make sure the surface and the
contacts of the battery always are
clean and dry before connecting
the char
ging unit. When dirty
clean them with a soft, dry rag;
never use running water.
If you do not use the battery for
long periods of time, please
charge it again before using.
Since a gradual self-discharge
occurs, charge the battery
completely before initial use
after longer periods of storage.