Filter
Top Products
Wiring diagram- (2) Inside Handle (L)
P 8 / 8
Fig. 19
Fig. 20
1. Before installing Main switch onto Handle (L), fix the following lead wires
with lead wire holders as illustrated in Fig. 19.
* Field lead wire (orange)
* Field lead wire (yellow)
* Lead wire (black) from switch installed on Gear housing (L)
2. After installation of Main switch, put the loose portion of the Lead wires into the space illustrated in Fig. 20.
Main switch
Main switch
Lead wire holders
Field lead
wire (orange)
Field lead
wire (yellow)
Lead wire (black) from
Switch installed on
Gear housing (L)
Noise suppressor
Noise suppressor
Put the loose portion of
lead wires into this pace.
Handle (L)
Handle (L)
[end of repair manual]