Filter
Top Products
Repair
P 2 / 8
< 1 > Lubrication
Apply Makita grease N. No.1 to the following portions designated by black triangle
to protect parts and product from unusual abrasion. (Fig. 1)
< 2 > Removing Gear Housing from Motor Housing for Replacement of Armature Assembly
1. After removing brush holder caps, remove carbon brushes.
Remove a 4x18 tapping screw. Now cover (for switch) can be removed from gear housing L. (Fig. 2)
(to be continued to next page)
Gear housing L
Gear housing R
Straight
bevel gear 14
(35)
(31)
(31)
Item No.
Part Name
Amount: g
Portion to be lubricated
Worm gear Whole part approx. 1.0
(35) Straight bevel gear 43 Whole part approx. 3.0
CAUTION:
First of all, remove the chain blade for your safe repair and maintenance.
Fig. 1
Fig. 2
Brush holder cap
Carbon brush
Tapping screw 4x18
Cover (for switch)