Filter
Top Products
24.
Children and Minors should not operate string trimmers with metallic cutting tools, except minors
who are properly training and remain under the supervision of a qualified operator.
25. When refueling, be sure to stop the engine and confirm that it is cooled down. Never refuel when
the engine is running or warmed up. When gasoline spills, be sure to wipe it up completely and
properly dispose of those materials before starting the engine.
26.
Stay clear of other workers.
27.
Whenever approaching an operator of the machine, carefully call his attention and confirm that
the operator stops the engine.
28. Never touch the nylon cutting head whenever the engine is running. If it is necessary to adjust
the protector or nylon cutting head, be sure to stop the engine and confirm that the nylon cutting
head stops running.
29. The engine should be turned off when the string trimmer is moved between working areas.
30.
Be careful not to hit the nylon cutting head against stones, or the ground. Unreasonable operation
will shorten the life of the machine as well as create an unsafe environment for yourself and those
around
you.
31.
Pay attention to loosening and overheating of parts. If there is any abnormality on the machine,
stop operation immediately and check the machine carefully. If necessary, have the machine serviced
by a qualified service facility. Never continue to operate a machine which may be malfunctioning.
32. In startup or during operation of the engine, never touch high-temperature parts such as the muffler,
the high-voltage wire or the spark plug.
33. For a while after the engine is stopped, the muffler is still hot. Never place the machine at any
place where there are flammable materials (dry grass, etc.) or combustible gasses.
34.
Pay special attention to operation in the rain or just after the rain as the ground becomes slippery.
35. If
you
slip or fall to the ground or into a hole, return the throttle lever immediately.
36. Be careful not to drop the machine or hit
it
against obstacles.
37.
Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark
plug cap from the spark plug.
38. When the machine is to be kept
in
storage for a long time, drain fuel from the fuel tank and
carburetor, clean the parts, move the machine to a safe place and confirm that the engine is cooled
down.
39. Make periodic inspection to always assure safe and efficient operation. If
you
need a careful
inspection of your machine, please contact our agent or dealer.
40.
Keep the machine well away from fire or sparks.
41. Warning: The cutter area is still dangerous while the machine is coasting to a stop.
42.
Don't try to tackle a big job
with
an undersized tool.
43. Wear a dust mask
in
dusty work conditions.
44. Wear hearing protection during loud or extended periods
of
use.
45. Keep guards and protectors
in
place and in working order.
CAUTION
!
CAU TI
0
N
!
CAUTION
!
WHEN MIXING GASOLINE WITH TWO CYCLE ENGINE OIL, USE ONLY GASOLINE WHICH CONTAINS
NO ETHANOL
OR
METHANOL (TYPES
OF
ALCOHOL), THIS WILL HELP TO AVOID POSSIBLE DAMAGE
TO ENGINE FUEL LINES AND OTHER ENGINE PARTS.
SAVE
THESE
INSTRUCTIONS.
3