Filter
Top Products
REPLACING
THE
NYLON
CORD
The nylon cord can be easily replaced without removing the nylon cutting head from the String trimmer. Always
stop the engine before replacing the nylon cord.
1.
Loosen the knob in the direction of the arrow
engraved on the knob. Remove the knob and the
cover. Take out the spool.
2.
Remove the remaining nylon cord from the
spool.
3.
Bend a new nylon cord nearly in half
so
that there
is approx.
120
mm
(4-314")
of
difference between
the two ends.
IA
(1
1
Knob
(2)
Cover
13)
Spool
14)
Housing
(51
Eyelet
I
I
73
'=&
\
120
mm
14-314")