Makita EBH340U Brush Cutter User Manual


 
4
General Instructions
– To ensure correct operation, user has to read this
instruction manual to make himself familiar with the
handling of the Brush Cutter. Users insufficiently
informed will risk danger to themselves as well as others
due to improper handling.
– It is recommended only to lend the Brush Cutter to people
who have proven to be experienced with Brush Cutter.
Always hand over the instruction manual.
– First users should ask the dealer for basic instructions to
familiarize oneself with the handling of an engine powered
cutter.
– Children and young persons aged under 18 years must
not be allowed to operate the Brush Cutter. Persons
over the age of 16 years may however use the device for
the purpose of being trained only whilst under supervision
of a qualified trainer.
– Use Brush Cutter with the utmost care and attention.
– Operate the Brush Cutter only if you are in good physical
condition. Perform all work calmly and carefully. The
user has to accept liability for others.
– Never use the Brush Cutter after consumption of alcohol
or drugs, or if feeling tired or ill.
Intended use of the machine
– The Brush Cutter is only intended for cutter grass, weeds,
Bushes, undergrowth it should not be used for any other
purpose such as Edging or hedge cutting as this may
cause injury.
Personal protective equipment
– The clothing worn should be functional and appropriate,
i.e. it should be tight-fitting but not cause hindrance. Do
not wear either jewelry or clothing which could become
entangled with bushes or shrubs.
– In order to avoid either head-, eye-, hand-or foot injuries
as well as to protect your hearing the following protective
equipment and protective clothing must be used during
operation of the Brush Cutter.
– Always wear a helmet where there is a risk of falling
objects. The protective helmet (1) is to be checked at
regular intervals for damage and is to be replaced at the
latest after 5 years. Use only approved protective
helmets.
– The visor (2) of the helmet (or alternatively goggles)
protects the face from flying debris and stones. During
operation of the Brush Cutter always wear goggles, or a
visor to prevent eye injuries.
– Wear adequate noise protection equipment to avoid
hearing impairment (ear muffs (3), ear plugs etc.).
– The work overalls (4) protect against flying stones and
debris.
We strongly recommend that the user wears work
overalls.
– Special gloves (5) made of thick leather are part of the
prescribed equipment and must always be worn during
operation of the Brush Cutter.
SAFETY INSTRUCTIONS
(1)
(2)
(3)
(4)
(5)
(6)