Filter
Top Products
10
Bevel cutting
Loosen the bolt (A) on the depth guide and the bolt (B) on
the bevel scale plate with the hex wrench. Set for the desired
angle (0° - 45° ) by tilting accordingly, then tighten the bolts
(A) and (B) securely.
CAUTION:
• After adjusting depth of cut and bevel cutting angle, be
sure to tighten the bolts (A) and (B) securely.
Sighting
For straight cuts, align the A position on the front of the base
with your cutting line. For 45° bevel cuts, align the B position
with it.
NOTE:
• When making bevel cuts, view the cutting line on the
workpiece through the window in the blade case in order
to cut more accurately. If you have difficulty seeing it
because of the water tank, adjust the position of the tank
by tilting it backward slightly.
Switch action
CAUTION:
• Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the “OFF” position when
released.
To prevent the switch trigger from being accidentally pulled, a
lock-off lever is provided.
To start the tool, slide the lock-off lever in the direction of the
arrow and pull the switch trigger. Release the switch trigger
to stop.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
1. Bevel scale plate
2. Bolt (B)
3. Bolt (A)
1
2
3
003514
1. Blade case
2. Base
AB
1
2
003519
1. Lock-off lever
2. Switch trigger
1
2
003522