Filter
Top Products
Trimmer guide (Optional accessory)
Trimming, curved cuts in veneers for fur-
niture and the like can be done easily with
the trimmer guide. The guide roller rides
the curve and assures
a
fine cut.
Install the trimmer guide on the guide
holder with the wing bolt. Then use the
hex wrench to loosen the bolts on the tool
base and insert the guide holder into the
grooves in the tool base. Adjust the dis-
tance between the bit and the trimmer
guide and tighten the bolts securely.
When adjusting the trimmer guide up or
down, loosen the wing bolt. After adjusting
it,
tighten the wing bolt securely.
Trimmer guide
/
When cutting, move the tool with the guide
roller riding the side
of
the workpiece.
I
kBit
roller
x