Filter
Top Products
3
General Safety Rules
1. Read and understand manual.
2. Wear eye, hearing, and breathing protection, proper
clothing and footwear.
3. While operating the machine, maintain a safe operating
position, secure footing and good balance at all times.
4. Keep area clear of children, pets and bystanders.
5. Never attempt to use an incomplete machine or one fitted
with an unauthorized modification.
6. Avoid contact with and inhalation of harmful fluids, gases,
mists, fumes, and dust.
7. Check operation of the safety interlock switch daily. Do
not defeat interlock system; it is for your protection.
8. Do not allow children to operate machine.
9. Do not override or remove any safety devices.
13. Keep hands away from hose inlet and discharge chute.
14. Disconnect spark plugs before doing any cleaning or
maintenance – There are two spark plugs on the machine.
Disconnect both.
15. If the Shredding TruckLoader is mounted on a trailer,
make sure that the driver of the towing vehicle has the
operator of the Shredding TruckLoader in full view at all
times.
16. When operating the Shredding TruckLoader, operator must
stay to the side of the machine, never in front or behind
17. Wear gloves to protect your hands.
18. Beware that the machine is loud and during normal
operation it may interfere with speech communication.
19. Check mounting hardware daily! Beware of the possibility
that the machine may overturn, fall, or tip over because of
unexpected movement of the vehicle.
A. Warnings - "Don’ts"
Don’t attempt to remove materials from
intake or discharge when Shredding
TruckLoader is running, or fan is rotating.
Don’t install or remove components while
Shredding TruckLoader is running. Turn off
engine to make changeover. Be sure throttle
is in the “slow” position, ignition key is in
the “off” position and the Shredding
TruckLoader has come to a complete stop.
Remove the spark plug wires from the
spark plug before removing material.
Don’t point the Shredding TruckLoader
discharge chute in the direction of people, cars, glass or
anything that could be injured or damaged by blown debris.
Don’t attempt to repair Shredding TruckLoader. Have repairs
made by a qualified Little Wonder dealer or repairman. See
that only Little Wonder and recommended engine manufacturer
replacement parts are used.
Don’t leave the engine running while the Shredding
TruckLoader is unattended.
Don’t store, spill, or use gasoline near flames or spark
B. Warnings - "Do’s"
Always dress properly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of sturdy gloves,
non-skid footwear and safety glasses are recommended.
Always wear ear protectors where possible. Use respirator
mask to avoid breathing dust.
Always stay alert. Watch what you are doing and use common
sense. Do not operate Shredding TruckLoader when fatigued.
Always keep hands away from air intake and air
discharge chute.
Always maintain and examine Shredding TruckLoader with
care. Follow maintenance instructions given in unit and
engine manuals.
WARNING DANGER
10. FAN COASTS AFTER THE ENGINE IS TURNED OFF.
WARNING DANGER
DO NOT SMOKE WHEN FILLING FUEL TANK
WARNING DANGER
11. ROTATING FAN. DON’T ATTEMPT TO REMOVE
MATERIALS FROM INTAKE OR DISCHARGE WHEN
UNIT IS RUNNING, OR FAN IS ROTATING.
WARNING DANGER
12. DO NOT OPERATE UNIT IF EXCESSIVE VIBRATION
OCCURS; SHUT ENGINE OFF IMMEDIATELY! REMOVE
SPARK PLUG WIRES AND CHECK FOR DAMAGED
IMPELLER, LOOSE IMPELLER BOLT, LOOSE IMPELLER
KEY, OR LODGED FOREIGN OBJECTS.
WARNING DANGER
DO NOT USE THE SHREDDING TRUCKLOADER IF
THE MUFFLER IS DEFECTIVE OR MISSING.