LG Electronics LSVFSD-LP Log Splitter User Manual


 
10
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
LOG PLACEMENT INSTRUCTIONS
1. Place rear ember bed as shown in Figure 11.
Figure 11 - Install Rear Ember Bed
2. Place rear log onto the two rear grate locating pins as shown
in Figure 12 (the locating pins are outlined in Figure 11).
3. Place middle log onto left middle grate locating pin and the
rear ember bed locating pin as shown in Figure 13.
Middle Log
Locating Pins
4. Place left and right front logs onto front grate locating pins as
shown in Figure 14.
Figure 12 - Install Rear Log
Figure 13 - Install Middle Log
Figure 14 - Install Left and Right Front Logs
Install
Ember bed
from behind
top burner
Top Burner
Rear Ember Bed
Position Ember Bed All the Way Forward in Gas Train Assembly
Locating
Pins
Rear Log
Rear Locating Pins
On Grate Assembly
Locating Pins Indicated by Arrows
Right Front Log
Left Front Log