Filter
Top Products
22
RTR10 & RTR15 Series Rotary Tillers 311-431M
7/22/08
Land Pride
Section 4: Maintenance and Lubrication
Table of Contents
Storage
!
CAUTION
Engage parking brake, disengage PTO, shut off tractor, and
remove key before making any of the following adjustments.
At the end of the working season or when the tiller will not
be used for a long period, it is good practice to clean off
any dirt or grease that may have accumulated on any of
the moving parts.
Check the tines for wear and replace if necessary. See
Tine Replacement on page 19.
Inspect the tiller for loose, damaged or worn parts and
adjust or replace if needed.
Lubricate as noted in Lubrication on page 23.
Repaint parts where paint is worn or scratched to prevent
rust.
Drain gearbox and chaincase oil. Drain oil in gearbox by
removing the bottom drain plug, or right hand cap. Drain
oil in chaincase by removing the bottom plug and tipping
tiller backwards. Be sure to refill gearbox and chaincase
at this time.
Store tiller in a clean, dry place.