Filter
Top Products
4
Important Safety Information
RCR1860 and RCR1872 Series Rotary Cutters 312-849M
12/17/07
Land Pride
Table of Contents
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.
818-130C
Caution 540 RPM
818-543C
Danger PTO
21428
21428
21428
818-540C
Danger Guard Missing
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly on surface
d. Squeeze out air bubbles with the edge of a credit card
or with a similar type straight edge.