Filter
Top Products
13
Section 2: Optional Equipment Set-Up
12/17/07
RCR1860 and RCR1872 Series Rotary Cutters 312-849M
Land Pride
Table of Contents
Rear Chain Guard Installation
Refer to Figure 2-4:
1. Remove Rear Metal Guard. See “Rear Metal Guard
Removal” on page 12.
2. Install rear chain guard (#1) with 3/8” x 3 1/2” long
carriage bolts (#2), deflector spacer (#3) and
3/8” flange nuts (#4).
3. Tighten all nuts (#4) to 31 ft-lbs as indicated in the
“Torque Values Chart For Common Bolt Sizes” on
page 28.
Rear Rubber Guard installation
Refer to Refer to Figure 2-5:
1. Remove Rear Metal Guard. See “Rear Metal Guard
Removal” on page 12.
2. Install rear rubber guard (#1) with 3/8” x 3 1/2” long
carriage bolts (#2), deflector spacer (#3) and
3/8” flange nuts (#4).
3. Tighten all 3/8” flanged nuts (#4) to 31 ft-lbs as
indicated in the “Torque Values Chart For Common
Bolt Sizes” on page 28.
Rear Chain Guard
Figure 2-4
Rear Rubber Guard
Figure 2-5
21401
21403