Filter
Top Products
25
Section 7: Features & Benefits
12/17/07
RCR1860 and RCR1872 Series Rotary Cutters 312-849M
Land Pride
Table of Contents
Section 7: Features & Benefits
RCR1860 & RCR1872 Rotary Cutters
Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
Available in 5 packs Order 5 packs and save money.
Tractor HP range 20 - 50 HP
2 Year gearbox warranty Shows our confidence in the gearbox integrity.
Cat. 3 driveline
with shear-bolt
Shear-bolt offers maximum driveline protection.
Cat. 3 driveline with
2-plate slip-clutch
Slip-clutch driveline offers convenience for continual work.
Dual position clevis type
3-point floating top link
Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with
shorter top links.
Lower clevis type
3-point hitch
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even
pull from the tractor’s lower arms, vs. pulling on a single pin design.
Cutting widths 60” and 72”
Heavy gauge
deck construction
11 gauge on 60” and 10 gauge on 72”.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Robotic welded. Adds additional strength.
Extended cutter front For increased material flow and added protection.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
Deck Height 7 1/4” Deck height on 60” and 8 7/8” deck height on 72” model
Allows cutter to handle heavy cutting conditions.
Cutting height 1”-9” for a wide range of cutting conditions.
Rear metal band,
rubber or chain guards
Aids against flying debris.
Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
10 Gauge stump jumper Standard round stump jumper slides over stumps, rocks and debris.
High blade tip speed Ensures clean cut.
15”Laminated tailwheel Laminated material is long lasting in rough conditions.
4” x 16” Solid rubber tailwheel Can’t go flat.
Heavy-duty spindle
on tailwheel
Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly.