Filter
Top Products
38
Section 6: Specifications & Capacities
AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M
11/14/08
Land Pride
Table of Contents
AFM4216 Series
Description Specification / Capacity Description Specification / Capacity
Discharge Type Rear
Cutting Width 16’- 8” Blade Drive Belt 1 B-Section
Overall Width 16’ -10” Drive Belt Tension Spring Loaded Idler with Overcenter
Release
Transport Height 8’ -10” Blade Bearing Sealed Ball Bearings
Transport Width 6’- 8” With Lock Pins Installed Blades
3 Each Per Deck
Low Lift (5/16" x 2 1/2" x 25")
Optional Blades:
Medium Lift, High Lift & Mulching
Overall Length 15’-0” Mowing Position
13’-4” Transport Position
Blade Overlap 1 1/4"
Machine Weight W/15” tires = 3,315 lbs.
W/18” tires = 3,465 lbs.
Blade Spindle Speed 2,302 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP Blade Tip Speed 18,340 F.P.M.
Hitch Pull Type with Adjustable Clevis and
Safety Tow Chain
Deck Tires 10 each, Air tires with Sealant
18 x 9.5 or 15 x 6.6
Tongue Support 2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support 3/8” Steel Channel Transport Tires 2 each, 23 x 10.5 with Sealant
Gearboxes 540 RPM (1)-Splitter & (3)-Wing Transport Locks Automatic with Pull Rope Release
Main Driveline (1) Cat. lV Constant Velocity with Slip
Clutch when wings are conventional
Wing Deck Flex 23 Degrees Left To Right
22 Degrees Front To Back
Deck Drivelines (3) Cat. II with or without Slip Clutch Center Deck Flex 10 Degrees Left To Right
22 Degrees Front To Back
Cutting Height 3/4" to 5 1/4" (In 1/4” increments) Hydraulic Outlets 1 Set Required
Deck Size & Quantity 3 each / 72” Deck Cylinders Dual Acting
Deck Overlap 8” Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Thickness 3/16” Turning Radius Zero Turning Radius
Anti-Scalp Roller Front Center and
Outside Deck Corners
Mowing Capacity
@ 2 mph
@4 mph
@ 6 mph
4.0 Acres Per Hour
8.1 Acres Per Hour
12.1 Acres Per Hour
Model 4216 Specification Drawing
17853