Filter
Top Products
11
Introduction
11/14/08
AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M
Land Pride
Table of Contents
Introduction
Definitions
Owner Assistance
The Warranty Registration card should be filled out by
the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the implement.
The parts on your All-Flex Mower have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your All-Flex Mower
require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sure to include your serial and model numbers
in correspondence also. Refer to Figure 1 for the location
of your serial number plate.
Serial Number Plate Location
Figure 1
NOTE: A special point of information that the
operator must be aware of before continuing.
IMPORTANT: A special point of information related to
its preceding topic. Land Pride’s intention is that this
information should be read and noted before
continuing.
26563
Manual Storage Tube
Land Pride welcomes you to the growing family of new
product owners.
This AFM42 Series All-Flex Mower has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from the machine.
Application
The AFM4214 (14 foot) and AFM4216 (16 foot) All-Flex
Mowers are designed and built by Land Pride to provide
excellent cutting quality and performance on lush type
turf grasses that are located on expansive and well
manicured areas such as sports fields, theme parks,
fairways, turf farms, and large estates.
They will deliver excellent performance when attached to
40-70 hp tractors with 540 rpm PTO speed and pull-type
draw bar. The hydraulic wing cylinders will easily lift up
the wing decks for a 6’-8" overall transport width when
moving from one site to another on public streets or on
right-of-ways.
The contour following capability, highly productive
cutting widths and rear discharge design of the floating
cutting decks will greatly reduce wide-area cutting times
and still deliver finely groomed surfaces at mowing
speeds from 2-6 mph. The AFM4214 and AFM4216
All-Flex Mower can be ordered with slip-clutch or
conventional wing driveline configurations and a choice
of 15 inch or 18 inch deck tires.
See “Section 6: Specifications & Capacities” and
“Section 7: Features & Benefits” for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.
• Refer to Figure 1. Store your Operator’s Manual in the
dry storage tube for future reference.
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.