Filter
Top Products
36
Section 6: Specifications & Capacities
AFM4214 and AFM4216 All-Flex Grooming Mowers 315-587M
11/14/08
Land Pride
Table of Contents
Model 4214 Specification Drawing
14043
Section 6: Specifications & Capacities
AFM4214 Series
Description Specification / Capacity Description Specification / Capacity
Discharge Type Rear
Cutting Width 14’-0” Blade Drive Belt 1 B-Section
Overall Width 14’-3” Drive Belt Tension Spring Loaded Idler with Overcenter
Release
Transport Height 7’-7 1/2” Blade Bearing Sealed Ball Bearings
Transport Width 6’ - 8” Blades
3 Each Per Deck
Low Lift (5/16" x 2 1/2" x 20 29/32")
Optional Blades:
Medium Lift, High Lift & Mulching
Overall Length 14’-10” Mowing Position
12’-11” Transport Position
Blade Overlap 1 1/4"
Machine Weight W/15” tires = 3,000 lbs.
W/18” tires = 3,150 lbs.
Blade Spindle Speed 3,362 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP Blade Tip Speed 18,396 F.P.M.
Hitch Pull Type with Adjustable Clevis and
Safety Tow Chain
Deck Tires 10 each, Air tires with Sealant
18 x 9.5 or 15 x 6.6
Tongue Support 2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support 3/8” Steel Channel Transport Tires 2 each, 23 x 10.5 with Sealant
Gearboxes 540 RPM (1)-Splitter & (3)-Wing Transport Locks Automatic with Pull Rope Release
Main Driveline (1) Cat. lV Constant Velocity with Slip
Clutch when wings are conventional
Wing Deck Flex 23 Degrees Left To Right
22 Degrees Front To Back
Deck Drivelines (3) Cat. II with or without Slip Clutch Center Deck Flex 10 Degrees Left To Right
22 Degrees Front To Back
Cutting Height 3/4" to 5 1/4" (In 1/4” increments) Hydraulic Outlets 1 Set Required
Deck Size & Quantity 3 each / 60” Deck Cylinders Dual Acting
Deck Overlap 6” Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Thickness 3/16” Turning Radius Zero Turning Radius
Anti-Scalp Roller Front Center and
Outside Deck Corners
Mowing Capacity
@ 2 mph
@4 mph
@ 6 mph
3.39 Acres Per Hour
6.78 Acres Per Hour
10.17 Acres Per Hour