Filter
Top Products
42
Section 7: Features & Benefits
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
7/28/06
Land Pride
Table of Contents
Section 7: Features & Benefits
AFM4014 All-Flex Grooming Mower
Features Benefits
Counter rotation on left hand
deck
Spreads grass clippings more evenly.
Optional Slip clutch protection Guards against premature gearbox failure. Protects mower deck spindles.
6” Deck overlap Eliminates blade skips when turning. Tighter turns can be made.
Back wheels on side decks
even with transportation tires
Allows the unit to be turned tighter without skips.
Rigid rear side deck tires Holds hills and slopes better. Safer unit than the competition.
Removable transportation tire
spindles
Allows a spindle to be replaced by simply removing two bolts.
High tip speed Lifts the grass up for a better cut. Better discharge of material. Tip rates as high or higher
than the competition.
Deflectors built into mower
decks
Safety features meet ANSI standards. Many competitors use chains for protection. Once
chains are removed the unit may not meet ANSI specifications.
Heavy center gearbox
mounting plate
Handles start up torque.
Large flotation tires with
sealant
18” Deck tires offer great flotation, less pounds per square inch.
Sleek frame design, including
single beam hitch and
compact deck overlap
Allows operator to make tighter runs without leaving windrows and skips. AFM virtually
becomes a zero turn mower.
Gearbox warranty S/N 368188- one year on all gearbox components.
S/N 368188+ 5 years on gearbox housing, gears and shafts,
3 years on bearings and seals in gearbox.
Narrow transport width 6’8” Transport width allows the unit to be transported with ease.
Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing for
excellent flotation from each deck.
Gearbox HP Rating 40 - 70 HP
Automatic wing locks When wings are raised in the full transport position, the wings lock in place, no need to get
off the tractor to lock.
1/4” Gauge wheel arms 1/4” Sidewall thickness on gauge wheel arms means a great deal of ‘hidden’ strength.
Rear discharge Even dispersal, discharged items are always aimed downward. No rear chains are needed,
which tend to clump damp grass.
23” Transport tires with
tapered bearings
23” Transport tires offer smooth roading. Tapered bearings offer longevity.
18,396 fpm Blade tip speed High blade tip speed for clean cut and efficient discharge.
Cat. 4 CV main driveline Constant velocity main driveline allows for tighter turns without harming U-joints in driveline.
Mulching blades Mulching blades are available.
Cat. 2 slip-clutch wing
drivelines
Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
Easy belt tension release Easily release belt tension for changing belt or for winter storage.
Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.