Filter
Top Products
31
Section 5: Maintenance and Lubrication
7/28/06
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
Land Pride
Table of Contents
Lubrication Points
50
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours
at which lubrication
is required
Lubrication
Legend
Driveline Constant Velocity Shaft
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
IMPORTANT: To extend the life of the constant velocity
joint, extensive lubrication must be performed every 8
hours of operation!
k. The constant velocity joint should be greased in a
straight position forcing grease through the
passages and into the cavity. After lubrication,
grease should be visible around the ball joints.
l. The constant velocity driveline comesequipped with
a grease zerk in the outer telescoping member and
must be greased every 8 hours to prevent premature
failure of the joint.
m. Grease fittings are located on the u-joints and
driveline shields and should be lubricated every 8
hours of operation.
12726
8
Hours
Driveline Shafts
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
12725
Driveline Shafts
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
13667
Models 4014 & 4016
Model 4011
25
Hours
25
Hours