Filter
Top Products
12
Section 2: Assembly & Set-Up (Optional)
PS2096 Series Primary Seeders 313-308M
4/03/08
Land Pride
Table of Contents
Small Seeds Drive Assembly
Refer to Figure 1-8:
1. Place decal “Danger Guard Missing” (#17),
“Danger Moving Parts” (#18) and “Seed Rate
Chart” (#19) in locations shown (beneath lid).
2. Assemble chain guard mounts (#5) with the 1/4”
flange bolts (#7) and flange nuts (#10). Do not tighten
until the complete drive has been assembled and the
chain guard (#15) installs properly. The chain guard
mounts are slotted for easier chain guard mounting.
3. Install chain idler with welded on spacer (#2) and
chain idler (#3) with 1/2” nut (#8).
4. Assemble the spacer (#4) and reduction sprocket
assembly (#6) to the 5/8” welded on bolt with the 5/8”
lockwasher (#11) and nut (#9).
5. Assemble the front roller sprocket (#12) and key (#1)
to the front roller shaft.
6. Install chain (#14) first and then chain (#13).
7. Assemble chain guard (#15) with knobs (#16).
Position chain guard mounts (#5) where needed and
tighten hardware.
20608
Small Seeds Drive Assembly
Figure 1-8