Filter
Top Products
11
Section 2: Assembly & Set-Up (Optional)
4/03/08
PS2096 Series Primary Seeders 313-308M
Land Pride
Table of Contents
Small Seeds Box (S/N 397502-)
Small Seeds Box Assembly
1. Remove theeight bolts, lockwashersand nutsthat are
assembled in the back of the main box. Retain two
bolts, lockwashers and nuts and use these to plug the
two holes in the back of the main box where the SMV
sign will be removed.
Refer to Figure 1-6:
1. Remove the SMV (#11) and SMV mounting bracket
from the main box.
2. Assemble the Small Seeds Box (#1) at the ends with
the four 5/16” bolts (#4), flatwashers (#10),
lockwashers (#9) and nuts (#6).
3. Align thefourboxspacers (#2) tothe inner holesof the
small seeds box and the main box and assemble the
four longer 5/16” bolts (#5), flatwashers (#10),
lockwashers (#9) and nuts (#6).
4. Install SMV (#11) with SMV mounting bracket to
Standard Seed Box Assembly (#1).
Refer to Figure 1-7
5. Attach the rubber seed tubes to the seed cups and
then through the small seed holes below.
20596
Remove SMV and plug the 2 Holes
Small Seeds Box Assembly
Figure 1-6
20607
20606
Attach hose to seed cups
and through holes below
Small Seeds Tube Assembly
Figure 1-7