Filter
Top Products
17
Commissioning
If you are unsure how an electric shower works, please read through the section
“User Instructions” before continuing.
Turn control to full cold. Turn the water supply fully
on.
Check for water leaks.
Set control to ‘I’. Switch on electrical supply.
Press the ‘Start/Stop’ button.
Water will be at full force
and at a cool temperature.
Turn control to full cold. The temperature will rise slightly.Set control to ‘II’.
Turn the control slowly.
Temperature remains cool
and ow is reduced
Electrical supply is
turned off at the mains.
0 - 5 Secs
0 - 10 Secs
1.
4.
3.2.
6.5.
9.8.7.
12.11.10.