Filter
Top Products
13
Feed cable into Case. Fit Earth
sleeve (not supplied) and then
strip insulation.
Do not twist cable cores.
L = BROWN
E = GREEN/YELLOW
N = BLUE
Ret the Cover, making sure it is
correctly located. Do not overtighten
screws.
Caution! Handle glass cover
assembly with care.
Do not use alternative screws to
secure the Cover. This can cause
internal damage to the appliance.
Do not seal around the back of
appliance.
Cover
Cover Retaining
Screw
When tting the Cover, position
the controls to correspond with the
internal drive features as shown.
Firmly connect the conductors. Do
not exert strain on the terminal
block.