Filter
Top Products
OPERATIONAL SAFETY continued...
Never allow the cutting blade to contact such items. Cut material higher at
first, allowing finishing mower to clear hidden objects. Never assume an area
is clear. Always Check!
Always stop the tractor, disengage PTO, set brake, shut off the tractor engine,
remove the ignition key, lower implement to the ground and allow cutter
blades to come to a complete stop before dismounting tractor. Never leave
equipment unattended with the tractor running.
Never place hands or feet under mower with tractor engine running or before
you are sure all motion has stopped. Stay clear of all moving parts.
Do not reach or place any part of your body under equipment until it is
blocked securely.
Do not allow riders on the finishing mower or tractor at anytime. There is no
safe place for any riders.
Do not operate unless all personnel, livestock, and pets are several hundred
feet away to prevent injury by thrown objects. Never direct discharge chute
toward anyone.
Never operate tractor and finishing mower under trees with low hanging limbs.
Operators can be knocked off the tractor and then run over by the rotating
blades.
The rotating parts of this machine have been designed and tested for rugged
use. However, they could fail upon impact with heavy, solid objects such as
steel guardrails and concrete abutment. Such impact could cause the broken
objects to be thrown outward at very high velocities. To reduce the possibility
of property damage, serious injury, or even death, never allow the cutting
blades to contact such obstacles.
Stop mower and tractor immediately upon striking an obstruction. Turn en-
gine off, remove key, inspect and repair any damage before resuming opera-
tion.
Stay alert for uneven terrain, holes, rocks, and roots and other hidden haz-
ards. Keep away from drop-offs and hazards that could cause roll over. Use
extreme care and maintain minimum ground speed when transporting or oper
- ating on hillsides, over rough ground and when operating close to ditches or
fences. Be careful and slow down when turning sharp corners and changing
direction on slopes. Do not start or stop suddenly on slopes. Avoid operation
on steep slopes. In extremely uneven terrain, rear wheels weights, front trac-
tor weight, and/or tire ballast should be used to improve stability.
14