Filter
Top Products
SAFETY PRECAUTIONS – General Safety
The Operator’s Manual brings to your attention
situations that can arise during the safe and routine
operation of your Kesmac Mower.
It also informs you how to deal with non-routine
conditions and situations, and avoid possible injury to
yourself or to others.
The manual outlines the safe practices that must be
followed when operating the mower when it is
equipped with standard equipment.
Note that attachments which are not specified by
Kesmac may affect the safe performance of the
machine, and are used at the Owner/Operator’s risk,
as they are not supplied or approved by Kesmac Inc.
BE A QUALIFIED OPERATOR BY :
• Reading and understanding the written
instructions in the Operator’s Manual and
also on the safety decals on the Mower and
the Tractor.
• Receiving training on the operation of the
Mower and the Tractor.
• Asking your equipment dealer or supervisor
to explain things you do not understand.
• Explain the written instructions in the
operator’s manual and on the safety decals to
operators who cannot read.
BEFORE OPERATING THE MOWER
Read this manual and any others supplied with the
machine.
Check that all safety decals and safety guards are
correctly located and are not damaged
MAINTENANCE SAFETY
Before doing any maintenance or service work :
• Due to moving heads, spring loadings, sharp
blades, and other potential injury causing
factors, exercise caution in the placement of
fingers and hands when carrying out
adjustments or repairs.
• Adjustments or service work must only be
done when the Reels are stationary and have
been lowered to the ground, the PTO is
disengaged and the tractor engine is
switched off. (If the tractor is attached to the
mower).
2