Filter
Top Products
HOOK-UP TO TRACTOR
Fig.8
It is important that the Mower Frame is ‘level’ for the
correct set-up for mowing. Connect the Mower Swivel
Hitch to the Tractor Draw Bar using an approved Draw
Pin. The front and rear Jack Shafts should be the same
height from the ground.
IMPORTANT
Adjust the Swivel Hitch to set the Mower Frame level to
the ground. It is removable to allow it to be rotated 180
degrees to increase the adjustment relative to the
Tractor Draw Bar.
(Optional Ball Hitch also illustrated).
IMPORTANT
The use of a Draw Bar hung between the 3-Point
Hitch Arms is not recommended.
Connect the PTO Shaft to the Mower Gearbox and the
Tractor Tail Shaft, see Fig.6, and secure the Shields.
WARNING
The PTO Shields are identified : Tractor End and Mower
End. If Shields are missing do not operate the
Mower.
13
Fig.8