Kenmore 3 Lawn Mower User Manual


 
ANNUAL MAINTENANCE INSPECTION
IMPORTANT
To maintain the efficient and reliable operation of your
Kesmac Mower it is important that the checks and
maintenance in the following schedule are carried out.
It is recommended that this be done at the end of the
mowing season, before storage, and also before the
start of a new season.
Carry out all of the previously recommended service and
maintenance schedules.
Also check the following :
Jackshaft Couplings. That the Keys are in place
and the Coupling Bolts are tight.
All Sheaves and Bushings are tight and Keys
are in place.
All Drive Belt Sheaves for excessive wear.
( See page 10 ).
Lift Chains for stretch, wear or damage.
Tie-Rod ball joints for wear.
Primary Drive belts for correct tension, wear or
damage.
PTO Shafts. Refer to the PTO manual supplied
with the mower.
29
Apply light oil to the Reel Blades and the Bed-
knife cutting edges to prevent rust.
Main Wheels Bearings. Refer to pages 34 and
35 for Main Wheel and Outrigger Wheel Axle
service details.
IMPORTANT
It is important to keep the Mower clean and well
maintained. If using a pressure washer do not direct the
high pressure water directly at Bearing Seals, water
forced into the bearing will result in bearing failure.