Filter
Top Products
Operating instructions KM 100/100 R / KM 100/100 R P English
22
Before every operation
General notes
! Stand sweeper on a flat surface
! Turn off key switch (position "0")
Testing and maintenance
work
! Check charge condition of
battery *
! Check side brushes *
! Check main brush *
! Empty the swept material
container
! Check tyre inflation pressure *
* See maintenance work chapter for
instructions
Commissioning
Adjust driver seat
! Open unit cover, engage stay bar
! Slightly loosen wing nuts of seat
runners
! Push the seat into the
appropriate position
! Retighten wing nuts
Note:
There is a further adjustment
possibility if the adjusting range is
insufficient
! Unscrew the 4 screws at the seat
contact switch plate
! Remove the plate
! Turn the seat forward
! Unscrew 4 screws of seat
mounting
! Shift seat and refasten with
screws
! Remount seat contact switch
plate
Switching on the machine
! Sit on the driver seat
! Do NOT actuate the drive pedal!
Note:
The machine is equipped with a
seat contact switch. The machine is
switched off and the parking brake
is automatically applied when the
driver leaves his seat.
! The main brush and side brush
switches are in their upper
position
! Turn the key switch to position "I"
Run machine
Danger
Do not stand up when driving –
danger of falling.
Prior to start of the machine
! The main brush and side brush
switches are in their upper
position
! Switching on the machine
Drive forwards
! Slowly press the driving pedal