Filter
Top Products
Operating instructions KM 100/100 R / KM 100/100 R P English
28
Checking the sealing cup
! The sealing cup must be
regularly checked for a proper fit.
Sealing cup at the suction turbine
Replacing side brush
! Unscrew fastening screws
(3 pieces) at the underside
! Slip side brush on carrier and
screw it tight
Check the sweep roller
! Stand sweeper on a flat surface
! Raise the sweep roller
! Turn key switch to "0" and
remove key
! Secure the machine against
rolling away using a wedge
! Remove the debris container
from both sides of the unit
! Remove tapes and string from
the sweep roller
Replace the sweep roller
— Replacing it is necessary when
the sweeping effect visibly
deteriorates due to wear of the
bristles.
! Stand sweeper on a flat surface
! Raise the sweep roller
! Turn key switch to "0" and
remove key
! Secure the machine against
rolling away using a wedge
! Remove the debris container
from both sides of the unit
! Unscrew front screw of right side
panellint
! Unscrew rear screws of right side
panelling
! Unscrew screws
! Loosen fastening screw of the
bowden cable and unhitch the
cable
! Unscrew the screw at the fulcrum
of the main brush rocker arm
! Pull off the main brush rocker
arm
! Lift off cover and remove main
brush