Filter
Top Products
English 9
This nozzle features four positions. The
high setting (+) provides a steady powerful
high pressure spray pattern, for general
cleaning. The low setting (-) creates a low
presure spray pattern.
Note: Detergent is applied with the nozzle
set at low pressure.
After pulling backwards to high pressure,
turn wand left or right to change the spray
pattern between point jet and flat jet.
ƽ WARNING
To avoid serious injury never point
spray nozzle at yourself, other persons
or animals.
Î STEP 1:
Slide spray wand tip to low pressure po-
sition.
Î STEP 2:
Fill a container with Kärcher detergent.
Place the filter end of detergent suction
tube into the container.
Î STEP 3:
With the engine running, pull trigger to
operate unit.
Liquid detergent is drawn into the unit
and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on sur-
face.
Î STEP 4:
Always draw fresh water through the
detergent suction tube when the clean-
ing job is done, to rinse/flush any re-
maining detergents from the injection
system.
For best results see Cleaning Tips for
specific information on how to clean dif-
ferent surfaces.
ƽ CAUTION
This unit has been designed for use with
cleaning detergents recommended by the
manufacturer. The use of other cleaning
detergents may affect the operation of the
machine and void the warranty.
Always Use Kärcher Detergent for Best
Results
Kärcher biodegradable detergents are spe-
cially formulated to protect the environment
and your pressure washer. The special for-
mula won’t clog the suction tube filter and
will protect the internal parts of the pressure
washer for a longer life. For Kärcher Deter-
USING THE ACCESSORIES
High / Low pressure nozzle
WORKING WITH DETERGENTS
Detergents