Filter
Top Products
English – 23
STARTING AND STOPPING
Stopping
Stop the engine by switching off the ignition.
Starting
Hold the body of the machine on the ground using your left
hand (CAUTION! Not with your foot!). Grip the starter handle,
slowly pull out the cord with your right hand until you feel
some resistance (the starter pawls grip), now quickly and
powerfully pull the cord. Reset the choke control as soon as
the engine fires and repeat until the engine starts. When the
engine starts, quickly apply full throttle; the throttle will
automatically disengage from the start setting. Never wrap
the starter cord around your hand
CAUTION! Do not pull the starter cord all the way out and do
not let go of the starter handle when the cord is fully extended.
This can damage the machine.
!
WARNING! When the engine is started with
the choke in either the choke or start throttle
positions the cutting attachment will start to
rotate immediately.