Filter
Top Products
English – 35
Repair instructions
Dismantling the carburettor
1. Dismantle the cylinder cover and the air lter.
2. Disassemble the handle holder (see gure 29).
Fig 29
Fig 30
Fig 31
Fig 32
3. Push the throttle actuator rod out of the han-
dle part. Unhook it from the carburettor (see
gure 30).
4. Remove the return hose (B) and suction hose
(C). Loosen the fuel pump (D). Let the fuel
hose (G) remain in place (see gure 31).
5. Loosen the screws (E) and unhook the rubber
mountings (F) (see gure 32).
NOTE!
Take care when lifting out the carburettor so
that the fuel hose does not become loose.