Jonsered CS 2186 Chainsaw User Manual


 
English – 35
MAINTENANCE
Weekly maintenance
1 Check that the vibration damping elements are not
damaged.
2 Lubricate the clutch drum bearing.
3 File off any burrs from the edges of the bar.
4 Clean the spark plug. Check that the electrode gap is 0.5
mm (0,020 inch).
5 Clean the ns on the ywheel. Check the starter and the
recoil spring.
6 Clean the cooling ns on the cylinder.
7 Clean or replace the spark arrestor mesh in the mufer.
8 Clean the carburetor compartment.
Monthly maintenance
1 Check the brake band on the chain brake for wear.
2 Check the clutch centre, clutch drum and clutch spring for
wear.
3 Clean the outside of the carburetor.
4 Check fuel hose for cracks or other damage. Change if
necessary.
5 Clean the inside of the fuel tank.
6 Clean the inside of the oil tank.
7 Check all cables and connections.
8 Replace the spark plug.
9 Replace the air lter.
8
5
4
3
2
6
7
1
3
1
8 9
0,5 mm