Filter
Top Products
English – 35
TECHNICAL DATA
EC-declaration of conformity
(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws
Jonsered CS 2163, CS 2163WH, CS 2165, CS 2171 and CS 2171WH from 2002’s serial numbers and onwards (the year is
clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the
COUNCIL’S DIRECTIVES:
of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN292-2, CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for EC type
examination in accordance with annex VI, have the numbers: 404/00/735 – CS 2163, CS 2163WH 404/00/734 – CS 2165,
404/00/733 – CS 2171, CS 2171WH.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with
annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The
certificates have the numbers: 01/161/031 – CS 2163, CS2163WH 01/161/030 – CS 2165, 01/161/029 – CS 2171, CS 2171WH.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 12 September 2002
Bo Andréasson, Development manager