Filter
Top Products
Assembly - 13
ASSEMBLY
MX13257
MX13258
4. Install all remaining spring tines (D, E and F) equally in
the positions shown, using a 1/2 x 1-3/4 in. capscrew (G),
1/2 in. flat washer (H), 1/2 x 1-3/4 x 3/8 in. washer (I),
1/2 in. lockwasher (J) and 1/2 in. nut (K).
5. Turn the cultivator over.
MX13290
6. Tighten all hardware except for the spring tine mounting
hardware.
7. Adjust the spring tines (P - S) until they are parallel with
the direction of travel. Tighten all spring tine mounting
hardware.
E
D
F
H
K
D
I
G
J
P
Q
R
S