Filter
Top Products
Your Authorized Company Dealer has genuine parts in stock. Only these approved
replacement parts should be used.
1.03 - Assembly Instructions
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire. They
often have extremely sharp edges and cut very easily.
1. Unbolt the wheel arms from the side of the crate.
2. Remove the hardware bag secured to the top hitch arms.
3. IMPORTANT: Remove the belt shields to inspect around the belt area and
under the gearbox central plate to be sure the area is clear of packing material
such as blocks of wood, paper, etc.
4. Bolt the wheel arm assemblies to the mower deck with the flat washers
Ø
10 and
locknuts M10. There is no difference between left/right or front/rear. Be sure both
assemblies are securely mounted.
5. Assemble each wheel to the yokes with one bolt M14x150, one nut M14, one inner
bushing and two side spacers. Tighten down snugly. The wheel should turn freely
but have no side to side movement.
6. Replace the belt shields.
G
ROOMING
M
OWER
O
PERATOR
’
S
M
ANUAL
G
ENERAL
I
NFORMATION
5 FRONTIER
1
2
3
4
6
7
8
9
Fig. 2
2. inner spacer
1. top hitch plate
5. top hitch support
3. bolt
4. top hitch arm
7. lower hitch arm
8. front support plate
9. front roller
6. linking plate
5