Filter
Top Products
1.03 - Model and Serial Number ID
Attached to the frame is an ID plate showing the model and the serial number. Record
your implement model and serial number in the space provided below. Your dealer
needs this information to give you prompt, efficient service when you order parts.
1.04 - Assembly Instructions
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire. They
often have extremely sharp edges and cut very easily.
Note: All hardware needed for assembly will be found in the hardware bag or on the
machine. Assembly will be easier if all parts are loosely assembled before tightening the
hardware.
6 Nut HH M10-1.50 C6 TK Z (#5BP0001279)
6 Washer lock Ø10 Z (#5BP0001280)
6 Washer flat Ø10 W (#5BP0002034)
6 Washer flat Ø11 W (#5BP0051776)
6 Bolt HH M10-1.50x90 C8.8 Z P (#5BP0026185)
Parts used to assemble wheel arm:
4 Wheel spacer (#5BP0008528)
4 Nut PT M14-2.00 C6 Z TK (#5BP0030358)
4 Bolt HH M14-2.00x140 C8.8 Z P (#5BP0006615)
Parts used to assemble wheels:
Hardware bag contains the following:
1Driveline
4Wheels
2Wheel arms w/yokes
2Top hitch arms
1Main frame assembly
Q.ty
Description
Each unit is shipped in a crate as a kit that consists of the following:
GROOMING MOWERS OPERATOR’S MANUAL
GENERAL INFORMATION 5 FRONTIER