Filter
Top Products
PAGES
12–13
Specifications
Specifications
Specifications
Engine 200D / 200D LC
Manufacturer and Model ......................John Deere 6068H
Non-Road Emission Standards ..................certified to EPA Tier 3 emissions
Net Power (ISO 9249) .........................159 hp (119 kW) @ 2,000 rpm
Cylinders ..................................6
Displacement ...............................414 cu. in. (6.8 L)
Off-Level Capacity ...........................100% (45 deg.)
Aspiration ..................................turbocharged, air-to-air charge air cooler
Cooling
Cool-on-demand hydraulic-driven, suction-type fan with remote-mounted drive
Powertrain
Maximum Travel Speed
Low ...................................2.2 mph (3.5 km/h)
High. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 mph (5.5 km/h)
Hydraulics
Open center, load sensing
Main Pumps ...............................2 variable-displacement axial-piston pumps
Maximum Rated Flow .....................2 x 56.0 gpm (2 x 212 L/m)
Pilot Pump ................................one gear
Maximum Rated Flow .....................7.9 gpm (30 L/m)
Pressure Setting .........................580 psi (3999 kPa)
System Operating Pressure
Implement Circuits .......................4,980 psi (34 336 kPa)
Travel Circuits ...........................4,980 psi (34 336 kPa)
Swing Circuits ...........................4,980 psi (34 336 kPa)
Power Boost ............................5,270 psi (36 335 kPa)
Controls ..................................pilot levers, short stroke, low effort; hydraulic pilot controls with shutoff lever
Cylinders
Heat-treated, chrome-plated, polished cylinder rods; hardened-steel (replaceable bushings) pivot pins
Bore Rod Diameter Stroke
Boom (2) ..................................4.72 in. (120 mm) 3.35 in. (85 mm) 49.61 in. (1260 mm)
Arm (1) ....................................5.31 in. (135 mm) 3.74 in. (95 mm) 58.07 in. (1475 mm)
Bucket (1) .................................4.53 in. (115 mm) 3.15 in. (80 mm) 41.73 in. (1060 mm)
Electrical
Batteries ..................................2 x 12 volt
Reserve Capacity ............................440 min.
Alternator Rating ............................80 amp
Work Lights ...............................2 halogen (one mounted on boom, one mounted on frame)
Undercarriage 200D 200D LC
Planetary final drives with axial-piston motors
Carrier Rollers (per side) ......................2 2
Track Rollers (per side) .......................7 8
Shoes (per side) .............................46 49
Drawbar Pull ...............................45,620 lb. (20 711 kg) 45,620 lb. (20 711 kg)
Track
Adjustment .............................hydraulic hydraulic
Guides .................................center center
Chain ..................................sealed and lubricated sealed and lubricated