&WARNING
.
Read and understand the entire instruction manual before attempting assembly or
operation.
.
This shear, brake, and roll is designed and intended for use by properly trained and
experienced personnel only. Ifyou are not familiar with the proper and safe operation
of a shear, brake, and roll, do not use until proper training and knowledge have been
obtained.
.
This shear, brake, and rollis intendedto be used by one person only.
.
The shear, brake and rollmust be bolted securely to a stand and the stand bolted securely
to the floor. If the machine is to be bench mounted,the bench must be able to support the
weight of the machine and must be boltedto the floor.
.
Keep the floor around the shear, brake, and roll clear of scraps, debris, oil, and grease. The
flooring around the machineshould bea non-skidtype.
.
Sheet metal stock has sharp edges.To preventcuts, use cautionwhen handling.
.
Keep hands and fingers clear of the area in front and rearof the shearing blades.
.
Keep guards in place when not using the slip roll.
.
Keep other people away from the shear, brake, and roll.
.
Keep hands and fingers clear of the slip roll "nip" points. Keep hand and fingers away from
the area in front and rear of the shear blades.
.
Keep hands and fingers away from the press brake dieswhen forming metal.
.
Do not exceed the maximum capacity of the machine.
.
Do not use the machinefor any purposeother than for which it is designed.
.
Failure to comply with all of these warnings may cause serious injury.
.
SOME DUST CREATED BY power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Lead from lead based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically"treated lumber.
.
.
.
YOUR RISK FROM THOSE EXPOSURES varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals:work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specifically designed to filter out microscopic
particles
- 1 -