Filter
Top Products
13
LIGHT BULB
LIGHT BEZEL
SHELL
BULB
RECEPTACLE
LOCKING NUT
LIGHT BULB REPLACEMENT
Repairs to the Surface
Minor scratches which do not penetrate the color finish (acrylic) can be removed with 600-grit wet/dry sandpaper.
Restore the glossy finish with an acrylic polish or a comparable automotive paste wax. Major scratches or gouges
which penetrate the acrylic surface require refinishing. Ask your dealer for special instructions.
Lamp
When the bulb burns out, replace it from the back of the lamp fitting, on the underside of the shell, by pulling out the
bulb receptacle. Replacement bulbs (7W, 12V) are available from your Jacuzzi Whirlpool Bath dealer.
Printed in the U.S.A.
Printed on Recycled Paper
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.
©1999 Jacuzzi Whirlpool Bath P946000 5/5/03
Jacuzzi Whirlpool Bath National Headquarters
P.O. Drawer J, Walnut Creek, CA 94596 (925) 938-7070
Service Support: Call (800) 288-4002
Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type.
It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of this product. Jacuzzi Whirlpool
Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.