Filter
Top Products
Page 65
J-400 Series
20.6 J-1000™ Audio System iPod Operation
1. Play iPod
Open front panel (16) and plug a iPod into the iPod Docking Station
(12) as shown. Refer to step 12 (page 61) for details. The iPod will
begin to play automatically. Close front panel. The “iPod” symbol will
display to indicate a iPod is connected.
To Play connected iPod: Press MODE button (4) to change to iPod •
mode. The iPod will play. The display shows current track, play time,
and iPod symbol to indicate an iPod is connected. Please note after
a few seconds the readout will default back to track count and song
title.
Note: DRM (Digital Rights Management) Files cannot be played on this
deck. Personal les (MP3, WMA, iTunes or AAC) can be played as long
as they are not DRM encrypted.
2. Searching File in iPod
To advance to next track, press TUN up button (2) once to increase
track counter one track. When nal track is reached, play will resume
on track #1.
To fast forward through tracks: Press and hold TUN up button (2) •
until track counter displays desired track, then release button.
To rewind current track: Press and hold the TUN down button (2) the •
track will quickly rewind until you release the button.
Note: It will go back to the beginning of the playing track when you press
the Tune/Seek down button once, and it will go back to the previous track
when you press the button once again.
3. Searching Folder in iPod
To select folder in iPod mode: Press AS/PS button (6) to display •
music and then playlist. Press VOL up/down button (3) to select
between Playlist, Artist, Albums, Genres, Songs and Composer (the
scroll sequence depends on the iPod that is used). At desired folder,
press ENT button (9) to conrm selection and enter into Sub-folder
selection. Then press VOL up/down to select again.
Note: At each desired folder/le, you need to press ENT to conrm
selection.
4. Notes for iPod mode
In iPod Mode, the play/pause function works.•
In iPod Mode, the RDM function does not work.•
In iPod Mode, press RPT button only can play the current track •
repeatedly. If RPT function is activated, press seek up/down button
could not select the next or previous track, it could only go back to
the beginning of the current track and begin to play again.