34
J-300
12.3 Pillow Care
Remove and clean the headrest pillows as needed with soapy water
using a cloth or soft-bristle brush. Always remove the pillows when
adding chemical shock treatment to the spa water. When the sanitizer
reading is below 4.0 ppm, pillows can be reinstalled.
CAUTION: Never attempt to remove the pillows by pulling on
the complete assembly! The pillows utilize a bolt-on design
that prohibits removal without tools.
!
To remove pillows:
1. Grasp pillow insert (A) with nger tips and
gently pry outward from pillow base (C).
2. Use a standard screwdriver to loosen and
remove mounting bolts (B) from pillow
base.
3. Assemble in reverse order after cleaning.
DO NOT overtighten pillow mounting
bolts!
12.4 Cleaning The Spa Interior
To preserve the sheen of your spa’s surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left on
the surface. This could cause severe sudsing when the spa is relled.
12.5 Vinyl Cover Care and Maintenance
Your Jacuzzi cover has a vinyl encasement. This vinyl encasement is
attractive and durable. Monthly cleaning and conditioning is strongly
recommended to maintain and increase the longevity of your cover.
A. To Clean and Condition the Vinyl Cover
1. Use a garden hose to loosen debris and dirt.
2. Using a large sponge or a soft bristle brush, use diluted or mild soap
and scrub the vinyl top. Rinse clean and do not allow soap to dry on
cover. Do not use soap on the underside of the cover.
3. Please check with your Jacuzzi Dealer for recommended cover
care and conditioning products. Condition using non-petroleum
based conditioners to keep the vinyl supple and threads/stitching
from drying out. Do not use solvents, abrasive cleaners or strong
detergents. Do not use products that contain silicone or alcohol.