Filter
Top Products
page 17
9.0 Control Functions
9.1 Control Panel
A. LED Display: Can
display current water
temperature (default dis-
play), water temperature
set point, selected skim-
ming/heating mode, and
error messages.
B. Warmer ( + ) Button: Increases water temperature set point.
C. Cooler ( - ) Button: Decreases water temperature set point.
D. Light Button: Turns underwater light on and off.
E. Jets 1 Button: Turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump off.
F. Jets 2 Button (J-230 Models): Turns high-speed jets pump #2 on
and off. Press once to turn pump #2 on; press a second time to turn
pump #2 off.
G. Heat Indicator: Lit when heater is on.
Operation Details
• Temperature Adjustment: 80 to 104°F (27 to 40°C). Factory default
setting is 100°F (38°C).
• Underwater Light Operation: Light runs for 1 hour then shuts off for
increased bulb life.
• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when acti
-
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
GA
B
C
D
E
F