Filter
Top Products
I-Transia™
The hanger bar A can be installed to the lifting strap carabiner B without the use of tools.
1. Pull and hold the retainer C up toward the pin D.
2. Move the pin and retainer down to open the carabiner B.
3. Install the hanger bar A onto the carabiner.
4. Release the retainer and pin.
5. Before use, ensure the hanger bar is installed completely onto the carabiner and the
retainer is in place, as shown in the figure.
3.3 Before Use
I-Transia is delivered with the emergency stop activated in order to ensure that the battery is
not being discharged during long-term storage (more than six months). Reset the emergency
stop by pressing the “RESET” button on the bottom of the hoist. Refer to Resetting the
emergency stop, page 17.
12
1183377-B