Filter
Top Products
11
Refer to the diagram above. The function of each
component is explained below.
A. The ten hydrotherapy jets provide a relaxing mas-
sage action. Three of the jets are adjustable. Note:
The adjustable jets can be closed and opened by
pushing and pulling the nozzles. If no air flows
through the jets when the air control is turned
counterclockwise, simply pull the nozzles slightly.
B. The whirlpool jet directs a flow of water that cre-
ates a whirlpool action in the spa.
C. The skimmer cleans the surface of the water.
D. The temperature probe reads the temperature of
the water.
E. The underwater light can be used for night opera-
tion (see USING THE CONTROLS on page 12).
F. The suction vents near the floor of the spa bring
water into the pump in order to operate the system.
The covers should always be in place over the suc-
tion vents. Never operate the spa without the
suction covers in place.
G. The air control determines the amount of air flowing
through the spa jets during operation (see USING
THE CONTROLS on page 12).
H. The filter can be removed for cleaning or replace-
ment (see CHECKING AND CLEANING THE FIL-
TER on page 13).
I. The console controls the spa jets, turns the under-
water light on and off, and adjusts the water temper-
ature setting (see USING THE CONTROLS on page
12).
J. The diverter controls the flow of water through the
hydrotherapy jets and the whirlpool jet (see USING
THE CONTROLS on page 12).
SECURING THE SPA COVER ON THE SPA
To secure the spa
cover, snap the latch-
es on the spa cover
into the buckles on the
wood panels.
The buckles can be
locked by inserting the
key and turning it
clockwise 1/4 turn. To
unlock the buckles,
insert the key and turn
it counterclockwise 1/4 turn. Always keep the buckles
locked when the spa is not in use. Keep the keys
in a safe place, out of the reach of children.
Spa Shell Diagram
F
D
E
C
A
B
A
G
H
I
J
Latch
Key
Buckle